|
SECTION 1: Identification of the substance/mixture and of the company/undertaking |
| 1.1 Product identifier: Trade name：WynCoat® SL-3245 Chemical name: Polyether-modifier trisiloxane 1.2 Relevant identified uses of the substance or mixture and uses advised against: Coat and Ink additive 1.3 Details of the supplier of the safety data sheet Company name: Hangzhou Top Win Technology Development Co.Ltd. Address: NO. 10, Fenghe Road, Xiaya town, Jiande City, Zhejiang Province Tel: (86)571-64110920 Fax :(86)571-64110920 1.4 Emergency telephone number: (86)571-64113230 |
| SECTION 2: Hazards identification | ||||||||||
| 2.1 Classification of the substance or mixture: Classification according to Regulation (EC) No. 1272/2008 Acute toxicity, Inhalation; Category 4; H332 Irritating to eye ; Category 2B; H319 |
||||||||||
2.2 Label elements:
|
||||||||||
| 2.3 Other hazards: None known |
| SECTION 3: Composition/information on ingredients | ||||||||
| 3.1 Substance: -- 3.2 Mixtures:
|
| SECTION 4: First aid measures | |
| 4.1. Description of first aid measures | |
| Inhalation: | Ensure supply of fresh air. In the event of symptoms take medical treatment. |
| Eyes: | Flush eyes for 15 minutes or more, if irritation persists, seek medical advice. |
| Ingestion: | Seek medical advice immediately. |
| Skin: | Wash off promptly and flush contaminated skin with water. Promptly remove clothing if soaked through and flush skin with water. Get medical attention if symptoms persist. |
| 4.2 Most important symptoms and effects, both acute and delayed：
None known |
|
| 4.3 Indication of any immediate medical attention and special treatment needed：
Treat symptomatically |
|
| SECTION 5: Firefighting measures |
| 5.1 Extinguishing media: Alcohol-resistant foam; Carbon dioxide (CO2); Water spray. 5.2 Special hazards arising from the substance or mixture: Carbon monoxide, carbon dioxide, silicon dioxide 5.3 Advice for firefighters: Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. |
| SECTION 6: Accidental release measures |
| 6.1. Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. 6.2 Environmental precautions: Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers. 6.3 Methods and material for containment and cleaning up: Take up with absorbent material (eg sand, universal binder). Dispose of absorbed material in accordance with the regulations. |
| SECTION 7: Handling and storage |
| 7.1. Precautions for safe handling Use with adequate ventilation. Avoid eye contact. Do not take internally. Exercise good industrial hygiene practice. Wash after handling, especially before eating, drinking or smoking. 7.2 Conditions for safe storage, including any incompatibilities 7.3 Specific end use(s) |
| SECTION 8: Exposure controls/personal protection |
| 8.1 control parameters: Contains no substances with occupational exposure limit values 8.2 Exposure controls: |
|
SECTION 9: Physical and chemical properties |
|
|
9.1 Information on basic physical and chemical properties |
|
|
Physical Form: |
Liquid |
|
Color |
Yellow |
|
Odor: |
Characteristic odor |
|
pH:. |
Not determined |
|
Melting point/freezing point; |
Not determined |
|
Initial boiling point and boiling range |
Not determined |
|
Flash Point: |
³70°C (Pensky-Martens Closed Cup) |
|
Evaporation rate |
Not determined |
|
Flammability (solid, gas); |
Not determined |
|
Upper/lower flammability or Explosive limits |
Not determined |
|
Vapour pressure |
Not determined |
|
Vapour density |
Not determined |
|
Specific gravity |
1.01-1.03g/ml(25°C) |
|
Solubility in water |
Soluble |
|
Partition coefficient (n-octanol/water) |
Not determined |
|
Autoignition temperature: |
Not determined. |
|
Decomposition temperature |
Not determined |
|
Viscosity(25°C) |
70-100 cst |
|
Explosive properties: |
Not determined |
|
Oxidising properties |
Not determined |
|
Other physical propties |
Not determined |
| SECTION 10: Stability and reactivity | |
|
10.1 Reactivity |
Stable under normal conditions |
|
10.2 Chemical stability: |
No hazardous reactions with proper storage and handling. |
|
10.3 Possibility of hazardous reactions |
Exposure to moisture. |
|
10.4 Conditions to avoid |
Unknown |
|
10.5 Incompatible materials |
Unknown |
|
10.6 Hazardous decomposition products |
None with proper storage and handling. |
| SECTION 11: Toxicological information | ||||||||
|
| SECTION 12: Ecological information | |
|
12.1 Toxicity |
LC50: ≥1 - 10 mg/l Exposure time: 96 h Remarks: Based on data from similar materials. |
|
12.2 Persistence and degradability: |
No data available |
|
12.3 Bioaccumulative potential: |
No data available |
|
12.4 Mobility in soil: |
No data available |
|
12.5 Results of PBT and vPvB assessment: |
No data available |
| SECTION 13: Disposal considerations | |
|
13.1 Product disposal: |
Dispose of in accordance with local regulations. |
|
13.2 Packaging disposal: |
If empty contaminated containers are recycled or disposed of, the receiver must be informed about possible hazards. |
|
SECTION 14: Transport information |
|
|
14.1 UN number |
-- |
|
14.2 UN proper shipping name: |
-- |
|
14.3 Transport hazard class(es) |
-- |
|
14.4 Packing group |
-- |
|
14.5 Environmental hazards |
-- |
|
14.6 Special precautions for user |
No |
| SECTION 15: Regulatory information |
| 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
National legislation Technical instructions on Air quality: 5.2.5 (no class) Major Accident Hazard Legislation: -- Water contaminating class: low hazard to waters Risk classification according to REGULATION (EC) No 1272/2008: -- |
| SECTION 16: Other information |
| 16.1 Contact Point:
Hangzhou Top Win Technology Development Co. Ltd. (86) 571-64110920 16.2 Prepared by: Revision data: 2017-08-01 This information is offered in good faith as typical values and not as a product specification. No warranty, expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate. |
